Banners are generally made of a plastic vinyl material. They have
a grain similar to cloth although some can be made of paper or other
types of smooth plastic. They are generally seamed (welded) along
the top and bottom sides and have grommets (flat nickel plated) every
24” to enable easy hanging. We generally stock 24”, 36"
and 48" banner materials but we can custom make banners to almost
can be either digitally printed or lettered with cut vinyl or be a
bit of both. They are most often used for advertising and special
events. Banners can be hung from the ceiling, in a window, against
a wall, under an awning, between posts, across a street, attached
to a light pole and anywhere else you can think of.
are durable both indoors and out. Regular banner material can last
several months outdoors or even longer depending on the conditions
and how they are installed. If the banner is meant to last longer
under hash conditions then it can be custom made to last for years.
Care: Because banners are sometimes being removed, stored,
transported and re-hung it is possible for the material or the graphics
to become damaged. To extend the life of your Speedpro Banner please
follow these instructions.
Large semi-temporary signs used to advertise any new development;
these are generally made of treated plywood known as MDO or 10 mil
This is signage for construction sites that consists of sheets of
treated plywood or 10 mil coroplast attached side by side to the perimeter
fence around the site. The purpose of the signage is to advertise
the development that is being built.
FULL COLOR PRINTED DECALS (STICKERS)
Speedpro can print any kind of decal for indoor or outdoor applications
whether it be for industrial, retail, institutional or simply for
fun. Contour cutting is also available at request.
Lettering (ready to apply): Cut lettering for your vehicle (or whatever
you need lettering or graphics on) that you can apply yourself.
This is removable signage to go on vehicles or other metallic surface.
If treated properly it can last a long time. To properly care for
your Speedpro Magnetic Sign and to avoid damaging your vehicle's finish
please follow these instructions.
Aluminum: This is a substrate used primarily for, but not limited
to, road and safety signage. It is light and very durable. Its outdoor
life expectancy is 10 years or more.
signs can be made with a sheet of rigid or hard corrugated plastic
sandwiched between two aluminum faces. This combination makes the
sign light, strong and durable. These signs are guaranteed to last
10 years outdoors.
Signage: Changeable lobby and office door signage are generally made
of anodized aluminum. The edges of the signs clip onto plastic holders
that have been attached to doors or walls (usually with double sided
tape or screws). They can easily be popped off and changed as needed.
Also known as A-Frames, these are usually made of PVC plastic or wood.
They are ideal for sidewalk or roadside signage and are made to withstand
the elements. They are light and easily transportable. Larger sandwich
boards can be made with wheels for easy transporting.
Sandwich Boards consist of a metal frame with a removable insert.
The frame is made so you can slide a sheet of Coroplast or PVC into
it which makes the sign changeable at a moments notice.
STORE FRONT/BUILDING SIGNS
This can be backlit or non-lit signage used on a building to advertise
the stores or businesses in the building. If not backlit it can be
made of metal, plastic or wood.
Signage: This consists of an electric signbox fronted with translucent
plastic. Lights in the box cause the message to be visible at night.
The face can be covered with printed or regular vinyl. Speedpro Signs
can re-face your existing backlit signage or in some cases create
and mount a new backlit sign.
Lettering: 3D letters made of either plastic or metal are attached
directly to the building wall.
Fabric-like vinyl stretched over a frame that has been attached to
the face of a building. The awning can be covered with lettering or
TRADE SHOW DISPLAYS
Trade show Backdrop: Most trade show backdrops are faced with thin
plastic that can be easily rolled up at the end of the show. The backdrop
frames easily fold up and can be carried away.
Stands: A Banner that can stand vertically in the middle of your display
allows people to walk around it. This lightweight frame holds the
banner rigid and takes up little room. Some stands even allow the
banner to roll up into the base at the end of the show for easy transport.
If you have a business and a vehicle and you don’t have your
vehicle promoting your business then you are missing out on the cheapest
form of advertising there is. Whether you have a car, mini-van, pick-up,
full-sized van, cube-van or tractor-trailer, all these can be moving
billboards promoting your product or service.
Wraps: Vehicle wraps are another form of vehicle graphics that consist
of wrapping the entire vehicle in digitally printed vinyl. You can
turn your vehicle into a real head-turner. A less expensive alternative
is a partial wrap where the vinyl film avoids the corners and other
'hard to conform to' portions of the vehicle yet the visual impact
is the same.
Graphics: If you have a fleet of vehicles that need to advertise your
products or services then Speedpro Signs will help.
can produce lettering and graphics for almost every vehicle imaginable
including (but not limited to) boats, motorcycles, snowmobiles, race
cars, sea-doos and recreational vehicles.
We can dress up your windows to advertise your products or specialties
or to give the window a classier look by installing lettering and/or
printed graphics on your window.
use special frosted vinyl which can give your window an etched glass
look for a fraction of the cost of real etched glass
cover the window with printed perforated window film. This enables
the people inside to see out while the graphic is visible to the outside
signage: Similar to development signs but meant to last longer. They
can be made of treated plywood, thick PVC plastic, aluminum-faced
wood, or 10 mil coroplast.